NightForce A208 - 34MM Scope Rings, Ultralite, 1.00/Medium/6 Screw*

• LIGHTWEIGHT & DURABLE - Only 1/3 the total weight of steel rings; approved for use under the heaviest of recoil conditions
• MATERIALS - Rings sets are crafted of machined 7075-T6 hard anodized aluminum, with titanium crossbolts and jaws, they give you the performance of steel at half the weight
• CONSTRUCTION - The unique construction of the rings provides strength well beyond that normally found in lightweight rings
• HIGH PERFORMANCE RINGS - The four-screw ring will provide a lifetime of service for most applications. If you think you need 50% more clamping force, the six-screw Ultralite Rings will hold your scope under any conceivable situation
• NOTE - Clean all mating surfaces thoroughly before mounting. Use a torque wrench and do not exceed recommended torque values: 4-screw models - 68 in-lb; 6-screw models- 100 in-lb

BROADBAND MULTI-COATING

• All air-to-glass surfaces receive our proprietary broadband multi-coating; applied to tolerances of 1/4 wave deposition or .000005 inches, exceeding the toughest Mil-Spec abrasion test. You will see the difference in low-light situations.

LENSES

• Every lens in a Nightforce scope is matched and aligned by hand perfectly to its partners. This technique, called optical indexing, yields the highest possible optical performance. Because it takes time and considerable expertise, many manufacturers don’t bother. We’ve done it this way since the beginning.

NIGHTFORCE TUBES

• Nightforce tubes are machined from solid bar stock 6061-T6 aircraft-grade aluminum alloy, not extruded or formed like those found on lesser scopes. They are two to three times thicker than other scopes. This means less overall stress, greater thermal stability, a consistent zero and a virtually impervious shield for the precision optics within.

NIGHTFORCE SPRING

• The spring that maintains pressure on our elevation and windage adjustments spends two weeks in a polishing tumbler before going into a Nightforce scope, to assure there are no rough spots or burrs to interfere with perfectly smooth operation. The NXS titanium spring has been optimized for a lifetime of performance, designed to never reach its fatigue limit or establish a memory, even if the setting is unchanged for long periods of time.

RUGGED. RELIABLE. REPEATABLE. NEVER COMPROMISING QUALITY

There is no such thing as “mass production” at Nightforce. Only a skilled human eye and experienced hands are sensitive enough to perform many of the critical operations involved in assembling a precision optical instrument. Before they leave the factory, Nightforce scopes are subjected to conditions far beyond most anything you will ever encounter in the field. During our impact tests, riflescopes must endure repeated impacts of over 1200 Gs of force on multiple axes. After each severe impact, the scope is hand-checked for tracking accuracy and overall integrity.